Doepfer A-171-2

()

Arată traducerea

Voltage Controlled Slew Processor / Generator

Adjustable slew-up time
Incremental curve switchable (linear / exponential)
Eurorack format
Power requirements: +30 mA (+ 12V) / -30 mA (-12V)
Width: 8 HP / 40.3 mm
Depth: 60 mm (measured from the back of the front panel)

Garantarea rambursării banilor în 30 de zile

3-Ani Garanţie Thomann

disponibil din Iunie 2013
numărul articolului 316720
unitate de vânzare 1 bucată(ăţi)
Width 8 TE / HP

Variante produs

Doepfer A-171-2

Doepfer A-171-2 Voltage Controlled Slew Processor / Generator * Adjustable slew-up time * Incremental curve switchable (...

653 lei

pagina produsului

Doepfer A-138s Mini Stereo Mixer

Doepfer A-138s Mini Stereo Mixer Mini Stereo Mixer * 4-in-2 mix module in Eurorack format * Four inputs with attenuator ...

415 lei

pagina produsului

Doepfer A-138M

Doepfer A-138M Matrix Mixer * With 4 rows and 4 columns * Unipolar / Bipolar mode switchable on each column * Suitable f...

777 lei

pagina produsului

Doepfer A-160-2 Clock Divider II

Doepfer A-160-2 Clock Divider II Frequency Divider * For clock/trigger/gate signals * Width: 4 TE/ 4 HP / 20 mm...

519 lei

pagina produsului

Doepfer A-198 (Module + Manual)

Doepfer A-198 (Module + Manual) Trautonium Controller * Consists of Doepfer A-198 Module and Ribbon Controller * Ribbon ...

1.150 lei

pagina produsului

123

Doepfer A-180-2 Multiples

Doepfer A-180-2 Multiples Passive Multi-Port Distributor * 8x Interconnected jacks * Sockets are divided into 2x quadrup...

185 lei

pagina produsului

154

Doepfer A-124 Wasp Filter SE

Doepfer A-124 Wasp Filter SE Wasp Filter * Special edition * Special 12 dB multimode filter * Circuit technology of the ...

459 lei

pagina produsului

Doepfer A-140-2

Doepfer A-140-2 Eurorack Module * Dual ADSR * Two identical analog envelopes in one module * Per envelope: CV input with...

729 lei

pagina produsului

Doepfer A-156

Doepfer A-156 Dual Quantiser The A-156 Module is a dual control voltage quantiser. A quantiser converts a continuous inp...

625 lei

pagina produsului

Doepfer A-106-5 SEM Filter Special Ed.

Doepfer A-106-5 SEM Filter Special Ed. Filter * 12 dB Multi-mode filter, in which the circuit of the SEM module is used ...

444 lei

pagina produsului

Doepfer A-199 Spring Reverb Module

Doepfer A-199 Spring Reverb Module Spring reverb module The Doepfer A-199 is a spring reverb module that via the aid of ...

625 lei

pagina produsului

Doepfer A-151

Doepfer A-151 Quad Sequential Switch Module * Electronic 4-position rotary switch * Trigger input * Reset input * 4 Inpu...

309 lei

pagina produsului

653 lei

Toate prețurile includ TVA

Nivel de vânzări

în Module Envelope

16 Evaluările clienților

5 15 Clienți 4 1 Client 3 0 Clienți 2 0 Clienți 1 0 Clienți

4.9 / 5

Manipulare

Caracteristici

Sunet

Măiestrie

Recenzii ghiduri

9 Recenzii

Arată traducerea

Arată originalul

Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.

Flexible multi tool for a great price

UglyKidJoe 25.05.2014

The A-171-2 is based on the CGS75 from Ken Stone which is itself a licensed adaptation of the Serge DTG/DUSG and is licensed from both therefore the higher price in comparison to other Doepfer modules. As a multitool it can be used for various tasks apart from the obvious slew generation: LFO, Envelope Generator, Low-Pass-Gate, Envelope Follower, VC Pulse Delay, Sub-Harmonic Generator or Oscillator (not recommended for playing notes though as the tracking is not exactly 1V/Oct).
Apart from the exp/lin switch the curve can also be set with the CV pots when nothing is patched in their input jackets. It then works similar to the log/lin/exp pot of the Maths from Make Noise which is very handy for setting subtle responce characteristics.
Beware that in the standard configuration it outputs only +5V which you can set with a trimmer. So modules needing more juice might sound different or filters might not completely open. E.g. this is important when combining the module with Make Noise or Malekko modules. In this case set the trimmer appropriately or use an external amplifier (a real amplifier as most VCAs are just attenuators).
I also own a Maths but prefer the A-171-2 as an Envelope Generator because in my opinion it sounds better with more snap. Might be because I'm using Doepfer VCAs (A-131-3 with the CEM3360). It's also easier to use attenuated CV on the A-171-2 because you have to patch another channel (2 or 3) of the Maths (or Function) to get CV attenuation and as the cycle swith is a mechanical switch it's state doesn't reset when powering down the modular.

semnaleaza un abuz

Consideraţi această evaluare inexacă sau inacceptabilă din anumite motive? Vă rugăm indicaţi motivul părerii dvs în următorul câmp – dacă e posibil – adresa de e-mail pentru întrebări suplimentare.

Arată traducerea

Arată originalul

Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.

Super powerful slew processor

Anonim 09.01.2016

When one thinks of a slew processor, one tends to think of notes sliding. Don't be fooled by the name; this module is capable of much more interesting tricks than that. CV control of lin / exp response is quite interesting, as is the ability to either slew an incoming signal or trigger an envelope from the A-171-2. When you flip the "cycle" switch on, it becomes a kind of VCLFO that will create sine to spiky waveforms with CV control of rise and fall.

At its most aggressive settings, it creates envelopes that are perfect for kick drums or other percussive hits. This module is a bit of a swiss army knife, as most of Serge's designs are.