La conținutul paginii

Bucket Brigade Device Module

Bucket brigade device module are used to delay audio signals before digital delays can diminish the effects produced by the BBD. BBDs have a number of very unique advantages (or disadvantages – depending on one's point of view) over their digital counterparts, which result from the specific characteristics of BBDs. BBD circuits can be regarded as a chain of sample-and-hold (S&H) units, which pass their voltages on to the next S&H in the chain at each clock pulse.

In either case, the sound produced by the A-188-1 module is quite special. Common applications include: Flanger, chorus, analogue delay or Karplus/Strong synthesis. However, as the A-188-1 has many highly unique features (voltage-controlled clock rate / delay time with an extremely wide range, polarity switches for CV inputs, feedback and BBD-Out / Mix, clock and CV outputs from the high-speed VCO, BBD clock input, feedback stage, feedback up to self-oscillation), the module can be used to create many unusual applications (such as, controlled by ADSR, an envelope, randomisation or a sequencer (with a positive or negative effect).

  • For the A-100 modular system
  • 4096 stages BBD
  • Width: 14 HP
  • Depth: 60 mm
  • Power consumption: +80 mA (+12 V) / -60 mA (-12 V)
  • disponibil din Iunie 2010
  • numărul articolului 114749
  • unitate de vânzare 1 bucată(ăţi)
  • Reverb Ne
  • Delay Yes
  • Multieffect No
  • Misc. Effects No
  • Width 16 TE / HP
925 lei
Toate prețurile includ TVA
în stoc
1

8 Evaluările clienților

4.5 / 5

Manipulare

Caracteristici

Sunet

Măiestrie

6 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
M
A bit too noisy
MassimoDavi 25.05.2020
This Doepfer BBD is a really nice unit.
I do both experimental and tonal music. In the first case it is a nice addition to any modular setup but if you are looking for a quiet delay this is not for you especially with standard music. You need a dedicated LPF to eliminate the clock noise at certain delay clock range. Yes it is normal but I find this unit noisier then average. Like all BBD if the LPF is pushed too far you will loose the high frequencies of the delay taps so the balance must be carefully set. I find best results with the Doepfer "Wasp" filter A-124. You can use it as part of the modular setup or as an outboard effects for your mixer
Manipulare
Caracteristici
Sunet
Măiestrie
1
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
J
Great BBD but requires some consideration
JMuzz 08.09.2021
Like all Doepfer modules, the a-188-1D is built well. The delay isn't the "Plug and play" delay a lot of people will be expecting though. You'll need to filter out your own clock noise and such. Once setup, it sounds great. However, if impatient or short on HP, this might not be the right choice for you. It's a large module, needs other modules to perform delay duties well and setting the gain also requires some consideration as overly loud signals, depending on the delay time, can also cause distortion. All pros in the rights hands, all frustration for the wrong ones. I like finding the devil in the details so for me, it's a great module.
Manipulare
Caracteristici
Sunet
Măiestrie
2
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
Z
Old school delay with bags of character
Zoë 18.05.2013
The A-188-1D is a fantastic delay module. It's slow enough that the clock signal doesn't get audible that often, in contrast to the faster A-188-1B. If you want a delay, get this D version. If you want a flanger, get the B version (or another quicker one) instead.

So how good a delay is it? It's not at all a pristine, digital one full of clarity. Quite the opposite: it's an old fashioned, analogue, imperfect, wonderfully quirky delay with bags of character. Instant Delia Derbyshire style sounds!
2
0
semnaleaza un abuz

semnaleaza un abuz