Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
SS
More excellent Jaspers products
The Jaspers stand I bought from Thomann has been a rock solid support system for some of my most valued synthesizers. However, some of them are big and quite heavy. I would be devastated if they were to be damaged, so, mindful of the Jaspers’ recommended weight limitations for each tier, I felt the need to add extra holders and the rear-mounted support bar that supports them.
The stock Jaspers stand comes with a pair of the longer holders meant to support your heaviest keyboards on the lower part of the stands. For my intended use, I knew I’d want more of them for synths placed higher up the stand. Luckily, Thomann sells them, as evidenced by this product page and review!
As ever, the build quality from Jaspers is superb and they have done the job for me for well over a year. I would have no trouble buying more if I needed them, and have recommended them to many other synth players I know,
If you are buying a new Jaspers stand, be sure to plan ahead, so that you can add additional parts such as these to your initial order, as it will save you a considerable amount of money to have it all shipped together.
The stock Jaspers stand comes with a pair of the longer holders meant to support your heaviest keyboards on the lower part of the stands. For my intended use, I knew I’d want more of them for synths placed higher up the stand. Luckily, Thomann sells them, as evidenced by this product page and review!
As ever, the build quality from Jaspers is superb and they have done the job for me for well over a year. I would have no trouble buying more if I needed them, and have recommended them to many other synth players I know,
If you are buying a new Jaspers stand, be sure to plan ahead, so that you can add additional parts such as these to your initial order, as it will save you a considerable amount of money to have it all shipped together.
0
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
DK
Works Exactly How It Should
I bought a set of these to add to a Jaspers 170-4-150-19B rack. They are easy to install and are built to last. I really like the modularity of the Jaspers System, you can start with a basic off the shelf rack and then customise it with well designed and built parts. I emailed the Jaspers company about something I wasn’t sure how it worked before I bought the Jaspers 170-4-150-19B and they were really helpful - which always boost confidence in a product.
0
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
N
A better option than the 40B
Despite the fact that the Jaspers 170-4-150B comes with 40cm holders, for larger synths (Moog One for example) the 60 cm holders are must if you want to achieve a good enough angle that the synth is simultaneously held by two supports, yet has an incline, allowing you to see and reach all the necessary knobs.
0
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
M
Versatile and qualitative.
Used to attach extra devices to the original keyboard holder.
Pros:
- Quality
- Lightness
- Easy mounting on the existing support, no need to disassemble it.
Cons:
- none
Pros:
- Quality
- Lightness
- Easy mounting on the existing support, no need to disassemble it.
Cons:
- none
1
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
TA
Perfect with Strengthening Set
I needed holders that could easily support a heavy Kawai K3 in conjunction with an additional strengthening bar. These are, like every other Jaspers piece, well made and exactly what one would expect to get the job done. The K3 fits perfectly on these holders and is super stable.
0
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
Very good stand holder
It works quite well - only downside - i did not measure properly - turns out i should have requested three 40B rather than 2 40B and 1 60B. But, it works just as well as the 40B and does not really add much extra space to the multi stand's footprint. Thank you
0
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
D
Necessary
Thanks everything arrived perfectly
0
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
Large surface area
I mounted these holders on the bottom of my rack and added a large piece of wood to create a stable surface. I needed a place to hold a collection of small desktop synths (volca's, moog and make noise). Works perfectly.
0
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
F
This Company is a Blessing!
This Company way the only one that could help me get all my keyboards together THANK YOU SO MUCH!!!
0
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
Top notch
Like all Jaspers stands and accessories this thing is precision made and works perfectly for its purpose.
0
0
semnaleaza un abuz