La conținutul paginii

Microfoane de Măsurare

Calibration system for stereo setups with Neumann KH 80 DSP and all ...
Calibration algorithms developed together with Fraunhofer IIS
Individually calibrated measurement microphone

beyerdynamic MM 1

For calibrating sound systems and measuring sound levels and frequency curves
Polar pattern: Omnidirectional
Frequency range: 20–20,000 Hz / 50–16,000 Hz ±1.5 dB

Sonarworks SoundID Ref Measurement Micro

An individual calibration profile with 0°, 30° and 90° off-axis measurement is ...
MEMS transducer with electret condenser capsule
Frequency range: 20 - 20,000 Hz with measurement protocol

Superlux ECM999

Also suitable for recordings and room sound analysis systems
Directivity: Omnidirectional
Frequency range: 20 - 20,000 Hz

Earthworks Audio M23 Gen2

Polar pattern: Omnidirectional
Frequency range: 5 - 35,000 Hz (+/-1 dB)
Requires phantom power: 48 V with 7.2 mA or 12 V with 4.8 mA

Behringer ECM8000

Polar pattern: Omnidirectional
Operation via phantom power from +15 V to + 48 V
Low-noise XLR output with gold-plated contacts

DBX DriveRack RTA-M

For Driverack and other measuring applications
Ball, electret capsule
Frequency range: 20 - 20,000 Hz

Audix TM-1 Plus

Pre-polarised 6mm condenser capsule
Omnidirectional
Transmission 20 Hz - 25 kHz (+/- 2 dB)

Earthworks Audio M30 Gen2

Polar pattern: Omnidirectional
Frequency range: 5 - 30.000 Hz (+/- 1 dB)
Sensitivity (1 kHz): -40 dBV/Pa (10 mV/Pa) +/- 2dB

Mipro ACT-5801 Measurement Bundle

Can be used with all dynamic microphones or condenser microphones with XLR plugs
Switchable 48V phantom power supply
Latency: 1.5 ms

the t.bone MM-1

Omnidirectional measuring microphone
Polarised 1/4" condenser capsule.
Polar pattern: omnidirectional

Pre-polarised 6mm condenser capsule
Omnidirectional
Transmission: 20 Hz - 25 kHz (+/- 2 dB)

For calibrating sound systems and measuring sound levels and frequency curves
Polar pattern: Omnidirectional
Frequency range: 20 - 20,000 Hz

Mipro ACT-800 Measurement Set 5UA

Frequency range: 482 – 554 MHz
Can be used with all dynamic microphones or condenser microphones with XLR plugs
Switchable 12 V / 48 V phantom power supply

With 1/4" ball capsule
Designed to use with Virtual StudioLive (VSL) or Smaart Analyzer Technology included
Frequency range: 20 Hz to 20 kHz

NTI Audio M4262

Class 2
Frequency range: 20 - 20,000 Hz
Polar pattern: Omnidirectional

Antelope Edge 360

Individually measured with a calibration profile specific to the serial number
16 mm Electret condenser capsule
Polar pattern: Omnidirectional

NTI Audio Mini SPL with Certificate

With omnidirectional characteristics according to IEC 60651
Type II
For ML1

Neumann MA 1 B-Stock

Calibration system for stereo setups with Neumann KH 80 DSP and all ...
Calibration algorithms developed together with Fraunhofer IIS
Individually calibrated measurement microphone

IK Multimedia MEMS Microphone for ARC System

Omnidirectional
Free field
Calibrated frequency response when used with ARC: 20-20,000 Hz +/- 0.5 dB

Superlux ECM 888 B

Frequency range: 20 - 20,000 Hz
Sensitivity at 1,000 Hz: 43dBV / Pa (7.1mV / Pa) ± 3dB
Impedance: 800 Ohm

Superlux ECM999U

Also suitable for recordings and room acoustic analysis systems
Polar pattern: Omnidirectional
Frequency range: 20–20,000 Hz

NTI Audio M2211

Class 2
Class 1 frequency response
Frequency range: 5 - 20,000 Hz

Mipro ACT-800 MM-100 Quad Set 5UA

Frequency range: 482 – 554 MHz
224 preset channels in 7 groups
Up to 48 compatible channels

Haun MBNM 550 EL

Polar pattern: Omnidirectional
Frequency range: 10 - 20,000 Hz
SPL: 126 dB max.

Behringer ECM Pro

A precise, calibrated condenser measurement microphone for professional room, PA and speaker ...
Omnidirectional pickup pattern for uniform 360° sound capture without positioning errors
Linear and frequency-neutral frequency response for accurate and reproducible measurement results

Transport gratuit de la 1.500 lei
Preturile includ TVA