the t.bone SSM 5

()

Arată traducerea

Universal Shock Mount

With microphone clamp
For microphones with diameter between 22 and 32 mm
5/8" Thread
Compatible thread reducer: Art. 104870 (not included)

Garantarea rambursării banilor în 30 de zile

3-Ani Garanţie Thomann

disponibil din Februarie 2007
numărul articolului 107393
unitate de vânzare 1 bucată(ăţi)
Colour Black

73 lei

Toate prețurile includ TVA

Nivel de vânzări

în Suporturi Antişoc pt. Microfoane

Asta au cumpărat clienții care au văzut acest produs

the t.bone SSM 7 Shock Mount

276 Evaluările clienților

5 151 Clienți 4 89 Clienți 3 26 Clienți 2 5 Clienți 1 5 Clienți

4.4 / 5

Măiestrie

Recenzii ghiduri

129 Recenzii

Arată traducerea

Arată originalul

Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.

A very sturdy unit

Ian1617 26.02.2014

I've bought 3 of these shock mounts from Thomann.
I scoured the internet for a good suspension mount for my Neumann RSM191. This microphone has an over-all diameter of 30mm, so most shock-mounts will not accommodate my microphone.
It is very sturdy, the outer ring being of metal construction.
The bands are strong and the stand mount is of a good quality.
The mic clamp is advertised as opening to a diameter of 30mm.
This is the greatest width that the clamp can open to. A small countersunk bolt secures the clip to the shock-mount. I should point out that this bolt protruded slightly on all three of the units I bought. Care may need to be taken in order to make sure that it doesn't scratch the case of your microphone if it has a diameter as wide as mine.

Over-all, a very sturdy unit and definitely the best value shock-mount of this type that I have found available.

semnaleaza un abuz

Consideraţi această evaluare inexacă sau inacceptabilă din anumite motive? Vă rugăm indicaţi motivul părerii dvs în următorul câmp – dacă e posibil – adresa de e-mail pentru întrebări suplimentare.

Arată traducerea

Arată originalul

Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.

Great product

Anonim 13.03.2017

I purhcased the t.bone SSM 5 microphone shock mount in order to use it with my previously bought the t.bone EM 9900 microphone. The microphone arrived with it's stock mic holder which you will find is unusable with boom poles as I am using it with the Rode Mini Boompole. So I had to purchase a shock mount holder to eliminate all the unneeded noises and bumps from the pole. After a quick research on the website I found this one and decided to try it out. It turned out to be a steal! Let's face it - the price is great on this piece.

What I love about it is it's ability to accomodate microphones anywhere from 19-20mm up to 30mm which is quite the range if you ask me. I also liked the build quality as all parts of it feel good. The ring is built of metal, the mount feels solid and of course not on last place the bands feel tight.

So far haven't had any issues with it and I can freely recommend it to you if your mic fits :)

semnaleaza un abuz

Arată traducerea

Arată originalul

Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.

It does the job very well

TRLDEX 26.11.2020

It has a very good fit on my ECM999 measurements mic and it also fits very well my AKG D5 too. For its price is very good indeed, definitely recommended.

The outer shock-mount is metallic (aluminum perhaps), so it is solid and should last.

semnaleaza un abuz

Arată traducerea

Arată originalul

Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.

Very pleased

Toader Silviu 05.03.2021

I use it for a SDC condenser mic (sE7) for Cajon tapa. It is not completely necessary for may application (tapa mic has already a Low Cut applied quite high so it eliminates any rumble picked by the mic), but it further eliminates vibrations which is quite nice.
Cons: a foam padding would have been great for the grip. I tried it on a Rode M2 mic and it got scratched because the grip has an exposed screw head that scratches any mic since you have to slide the mic in the grip. I solved it by tightening the screw and putting a small quantity of Sanitary Silicone over the exposed head to avoid scratching the mics. I don't know how long will it work until I will have to put another quantity of silicone.
The device is great. The above mentioned issue is a glaring omission but for the price it's great.

semnaleaza un abuz

Citește toate recenziile

the t.bone SSM 5

Universal Shock Mount

Asta au cumpărat clienții care au văzut acest produs

276 Evaluările clienților

Pentru a evalua produse trebuie să fiţi logat.

129 Recenzii

smart navigator

Servit cu dragoste!

the t.bone SSM 5

Universal Shock Mount

Asta au cumpărat clienții care au văzut acest produs

Accesorii și articole compatibile

276 Evaluările clienților

Pentru a evalua produse trebuie să fiţi logat.

129 Recenzii

Compară opțiunile

smart navigator