La conținutul paginii

Potentiometer

  • 500 kOhm
  • Logarithmic
  • Knurled shaft (split shaft)
  • CTS potentiometers are the first choice for many American guitar models
  • Low tolerance for reduced variation and greater accuracy
  • Total height: 30 mm
  • Overall diameter: 23.5 mm
  • Thread length: 9.5 mm
  • Thread diameter: 9.5 mm
  • Shaft diameter: 6.35 mm
  • Allparts no. EP-0086-000
  • disponibil din Aprilie 2017
  • numărul articolului 411573
  • unitate de vânzare 1 bucată(ăţi)
  • Design Split Shaft US
  • Resistance Value 500 kOhms
  • Characteristic Curve Logarithmic
  • Thread Length in mm 9,0 mm
  • Tandem Poti No
  • Push/Push No
  • Solderless No
  • shaft type grooved
52 lei
Toate prețurile includ TVA
în stoc
1

329 Evaluările clienților

4.7 / 5

Măiestrie

136 Recenzii

C-
Nice spares
Crivat - Bucovina band 01.12.2025
If you get yours not broken by rough handling, they are all good.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
T
Good quality pots but definitely not "low tolerance".
TCSMD 11.10.2021
These are good quality pots, as expected from CTS. The tolerance isn't quite as tight as I would ideally want though. I normally buy CTS pots with tighter tolerances from other sources but I was running out of 500k pots and didn't have a new shipment coming in soon enough for a couple of jobs with high priority so I took a chance on these.

The actual values I got varied from 481k to 542k which isn't really tight enough for my needs. If one of my customers specifies 500k for an electronics upgrade I need the actual values to be a little closer than this. I guess it's within the tolerance for standard CTS pots but Thomann have these pots listed as "low tolerance" which they are most definitely NOT so that's one star off the total ratings for the misleading marketing.

To sum it up: The quality of these pots is very good but if you need them to actually be close to 500k you had better look elsewhere for pots with tighter tolerances (or buy a lot of them and hope you win the lottery).
Măiestrie
8
2
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
N
Excellent touch
NunoPacheco 17.01.2026
Very good and smooth working. It is stable and reliable.
No sound interference at all. I recommend.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
S
range issue
Steph000 04.03.2023
Used as a tone pot with a fender .022uf capacitor mounted as typical 60s wiring, I get almost an on/off effect around 1 most of the course having close to no effect on sound.
Not sure if the pot or the capacitor is in cause.
Măiestrie
1
0
semnaleaza un abuz

semnaleaza un abuz