Adam Hall STRS6U Rack Stand 6U

()

Arată traducerea

Rack Stand 6U

Black
Threads for M5 screws
12 Screws included
Weight: 1.6 kg

Garantarea rambursării banilor în 30 de zile

3-Ani Garanţie Thomann

disponibil din Februarie 2012
numărul articolului 277570
unitate de vânzare 1 bucată(ăţi)
Type Tabletop Stand
Height 310 mm

Variante produs

153

Adam Hall STRS6U Rack Stand 6U

Adam Hall STRS6U Rack Stand 6U Rack Stand 6U * Black * Threads for M5 screws * 12 Screws included * Weight: 1.6 kg...

77 lei

pagina produsului

Adam Hall Rack Stand 12

Adam Hall Rack Stand 12 19" Rack Stand with 12 U * Material: Powder-coated steel * Thread suitable for M5 screws * 6-way...

179 lei

pagina produsului

Adam Hall Rack Stand 06

Adam Hall Rack Stand 06 19" Rack Stand with 6 U * Material: Powder-coated steel * Thread suitable for M5 screws * 6-way ...

163 lei

pagina produsului

302

Millenium RW-2001

Millenium RW-2001 19" Carriage with Rollers * Solid 12U construction with adjustable 8U bottom * Load bearing capacity u...

395 lei

pagina produsului

188

Millenium Rackstand 12U

Millenium Rack Stand 12U Rack Stand * Size: 12 U * Free-standing open rack * Material: Steel * Thread for M5 screws * De...

81 lei

pagina produsului

183

Millenium Rackstand 6U

Millenium Rackstand 6U Rack Stand 6 U * Thread for M5 screws * Dimensions (W x H x D): 48 x 29.5 x 35.5 cm * Including 1...

66 lei

pagina produsului

126

Millenium Rackstand 4U

Millenium Rackstand 4U Rack Stand 4 U * Thread for M5 screws * Dimensions without screws (W x H x D): 515 x 225 x 358 mm...

55 lei

pagina produsului

176

Adam Hall STRS12U Rack Stand 12U

Adam Hall STRS12U Rack Stand 12U Rack Stand * 12 U * Threads for M5 screws * 24 Screws included * Weight: 2.2 kg * Colou...

107 lei

pagina produsului

77 lei

Toate prețurile includ TVA

202

Nivel de vânzări

în Stative pt. Studio

153 Evaluările clienților

5 64 Clienți 4 48 Clienți 3 30 Clienți 2 6 Clienți 1 5 Clienți

4 / 5

Stabilitate

Măiestrie

Recenzii ghiduri

80 Recenzii

Arată traducerea

Arată originalul

Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.

6U Rack stand that is really only a 4U

Gerard1742 14.09.2015

This stand is a decent stand. It is tough and seems to be built well. The metal seems of good quality for sure. However, the stand has a big down side in regards to its function. There is a support strut that goes across the top of the stand. Well this pretty much rules out the chance of installing any 1u rack device. You just cannot avoid this strut. So your robbed of basically the top 1u slot. The next thing that robs you of another 1u is the fact that the stand is too low to allow the bottom 1U space to be filled. As others have said this stand is more like a 4U.

I guess it's down to poor design that two 1U slots are made redundant. So be careful in your choice of stand. Luckily there was no great urgency for me to have 6U, I just chose this stand for the extra space available if I need it perhaps in the future.

One other thing, which is not a big deal, but it would have saved some time. There is no guide on how to setup the stand. It is straight forward but a simple diagram would have helped. Must things come with set up diagrams, it's not a big ask to have had one supplied. I had to go onto the website again to see what the stand looked like so I didn't install the strut and the rear bar in opposite positions.

Performance wise the stand holds up well. It seems quite sturdy and so long as it's not abused it will hold your rack gear no problem. Obviously it will not take a huge 4U rack PA as this would just be too heavy. But it will hold your 1 U preamps and EQs and noise gates with no issues and it sits very stable on a flat surface such as a desk or cabinet.

semnaleaza un abuz

Consideraţi această evaluare inexacă sau inacceptabilă din anumite motive? Vă rugăm indicaţi motivul părerii dvs în următorul câmp – dacă e posibil – adresa de e-mail pentru întrebări suplimentare.

Arată traducerea

Arată originalul

Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.

Well Made Rack

ImAndi 05.05.2015

Hey, babe. Nice rack!

Thanks, it's the Adam Hall STRS6U and boy is it sturdy! Fill it up and it's even sturdy enough to use the top horizontal bar as a handle, depending on the weight of course.

semnaleaza un abuz

Arată traducerea

Arată originalul

Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.

I confirm the other reviews

BattleAngel 02.08.2021

Screw holes are badly made. I had 2 screw holes totally unusable. I would need to drill and remove metal elements that are blocking screws from a normal screwing. So immediately, 1U is totally unusable.
If not that, then top 1U would be actually totally usable on the contrary to other comments. This top bar/rod doesn't need to be mounted.
The stability is excellent. After mounting just 1U unit, it has become stable already. Now when I have 3U filled, there's nothing to complain. It sits on my desk, and even that small part of it is beyond the desk, it's super stable.
I bought this rack for two devices: Focusrite Scarlett 18i20 (second from the top) and Behringer Model D on the bottom (but not at the very bottom because holes in the rack ears didn't let me put it lower.

semnaleaza un abuz

Arată traducerea

Arată originalul

Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.

Solid

Molten 07.07.2018

If you?re looking for a rack that is solid, cheap and durable look no further. This rack will be in perfect shape in years to come as it?s built very solid and robust. At the same time lightweight. Great purchase!

semnaleaza un abuz

Citește toate recenziile

Adam Hall STRS6U Rack Stand 6U

Rack Stand 6U

153 Evaluările clienților

Pentru a evalua produse trebuie să fiţi logat.

80 Recenzii

smart navigator

Servit cu dragoste!

Adam Hall STRS6U Rack Stand 6U

Rack Stand 6U

Accesorii și articole compatibile

153 Evaluările clienților

Pentru a evalua produse trebuie să fiţi logat.

80 Recenzii

Compară opțiunile

smart navigator