TritonAudio FetHead

Start 360°

Arată traducerea

Microphone Preamp

For dynamic microphones and ribbon microphones
Extremely low-noise Class A JFet amplifier
27 dB gain (@3 kOhm load)
XLR 3-pin female to XLR 3-pin male
Four matched JFets

Note: Requires 24 – 48 V phantom power and does NOT allow phantom power to pass through to the microphone.

Garantarea rambursării banilor în 30 de zile

3-Ani Garanţie Thomann

disponibil din Mai 2018
numărul articolului 439143
unitate de vânzare 1 bucată(ăţi)
Channels 1
Number of microphone inputs 1
Instrument input No
Tubes No
Compressor/Limiter No
Equalizer No
De-Esser No
Phantom power No
Phase Reverse No
External effect loops No
Analogue Outputs XLR
Digitale Outputs 0
Headphone connection No
Level Meter No
Design Adaptor

359 lei

Toate prețurile includ TVA

Nivel de vânzări

în Preamp-uri

Asta au cumpărat clienții care au văzut acest produs

TritonAudio FetHead Phantom

415 lei

cumpărat

Cloud Microphones Cloudlifter CL-1 Mic Activator

625 lei

cumpărat

TritonAudio FetHead Germanium

418 lei

1133 Evaluările clienților

5 964 Clienți 4 134 Clienți 3 27 Clienți 2 4 Clienți 1 4 Clienți

4.8 / 5

Manipulare

Caracteristici

Sunet

Măiestrie

Recenzii ghiduri

717 Recenzii

Ambiguu 17.04.2021

I can't recommend this enough as an alternative for the cloud lifted (especially for SM7B). The only downside I had with this was using it no a Rode PSA1 arm.

The FetHead sometimes would disconnect from the SM7B and the signal would drop. However, a quick fix was to just plug it into the Focusrite. However, I did move the arm a lot, so this might not affect some (reinforcing it with a lace oro something similar would help).

Overall, I was very satisfied with the results!

Manipulare

Caracteristici

Sunet

Măiestrie

semnaleaza un abuz

Consideraţi această evaluare inexacă sau inacceptabilă din anumite motive? Vă rugăm indicaţi motivul părerii dvs în următorul câmp – dacă e posibil – adresa de e-mail pentru întrebări suplimentare.

Arată traducerea

Arată originalul

Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.

It turns my SM7B into a Beast

Gunso 28.01.2021

Title pretty much sums it up.
The gain boost makes a night & day difference on my Shure SM7B.

Comparing it with the same mic but without the FetHead, I'd have to keep my microphone gain on my Scarlett 2i2 on max. volume just to get the same amount of gain that I'd get at around 35-40% with the FetHead on the same interface.

If you have a Shure SM7B and you're looking for that extra gain, I can't recommend the FetHead enough. It's a must have.

Although keep in mind that you can't plug it into the interface, you have to plug it into the microphone directly, otherwise you'll have a lot of noise. Not sure if it's a FetHead thing or a Scarlett thing.
Also, not sure if worth mentioning but since the SM7B is a dynamic microphone, you'll have to turn on Phantom Power on your interface after putting on the FetHead.

Manipulare

Caracteristici

Sunet

Măiestrie

semnaleaza un abuz

Arată traducerea

Arată originalul

Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.

None intrusive

MrDevlin1964 04.11.2021

Yes you could pay double for a cloudlifter, but for me the none intrusive style of the Fethead did it for me.

I use this with my Shure Sm7b, whoa that girl is gain hungry, but the Fethead handles it like a boss, be it connected to my audio interface or straight into the mic, it really doesn't matter it feeds that mic with the gain it needs.

My preferred connection is straight into the Sm7b then xlr to audio interface, people just don't see it as it looks just like some fancy xlr, that's what I mean about none intrusive, there is seriously minimal white noise, even at the highest levels.

I would pick a Fethead over any other, for me it's a no brainer, if you want to see it in action find me on YouTube "The Restless Natives" you will see how the Fethead just blends in.

Should you buy it, my opinion is, you would be silly not to.

Manipulare

Caracteristici

Sunet

Măiestrie

semnaleaza un abuz

Arată traducerea

Arată originalul

Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.

Getting +25 dB Gain with RODE Procaster + Rodecaster Pro

Dr D 15.11.2019

Before I had the TritonAudio Fethead connected to my Rode Procaster microphone, I had to set the pre-amp gain to + 35 dB on my Rodecaster Pro interface. Now with the Fethead between the mic and the audio interface, I have the gain set to just 10 dB. Overall the sound quality is virtually the same. I can barely hear the Noise Gate activation with the Fethead attached, however the EIN floor is -130 dBu with the Fethead, as opposed to the Rodecaster Pro EIN of -125 dBu. Therefore, I have slightly better SNR (Signal-to-Noise Ratio) as the signal is stronger at lower pre-amp gain, plus the noise floor is lower, by around 5 decibels. The sound quality is extremely clean when recorded directly into my computer using Adobe Audition. So, I am very pleased with this product - it improves my input noise and means that I need very little audio interface gain to get a decent sound output.

Manipulare

Caracteristici

Sunet

Măiestrie

semnaleaza un abuz

Citește toate recenziile

TritonAudio FetHead

Microphone Preamp

Asta au cumpărat clienții care au văzut acest produs

1133 Evaluările clienților

Pentru a evalua produse trebuie să fiţi logat.

717 Recenzii

smart navigator

Servit cu dragoste!

TritonAudio FetHead

Microphone Preamp

Asta au cumpărat clienții care au văzut acest produs

Accesorii și articole compatibile

1133 Evaluările clienților

Pentru a evalua produse trebuie să fiţi logat.

717 Recenzii

Compară opțiunile

smart navigator