La conținutul paginii

Mobile Absorber and Diffuser

  • Reduces the pick up of unwanted noise such as room reflections and echoes
  • Thanks to its design, the Mic screen can be quickly set up and dismantled both in the studio and in live applications
  • Fits on almost any standard microphone stand (up to max. diameter 35 mm)
  • 5/8" Threads for microphone clamps or suspensions
  • Dimensions (L x W): 295 x 160 mm
  • Consists of 5 pieces
  • Colour: Black
  • disponibil din Octombrie 2020
  • numărul articolului 491678
  • unitate de vânzare 1 bucată(ăţi)
  • Type Mic Stand Absorber
205 lei
Toate prețurile includ TVA
în stoc
1

241 Evaluările clienților

4.3 / 5

Măiestrie

118 Recenzii

A
Ok for the money
Alexail 21.01.2022
A little hard to close the clamp system when you set it up, i just left one open, not beeing able to hook the screw but it's ok, it works. How much of a differnce it makes in recordings? not that much really. You're room matters more.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

S
Fantastic
Samelu 23.11.2022
Raportul preț calitate este perfect. Își face treaba bine pentru un home studio.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

TA
Really good
Tintea Alin 14.04.2025
Looks awesome, sturdy enough, works great!
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
3
Good budget option with some trade-offs
3LD 27.03.2026
I ordered this for my wife as she was having issues with reflected sounds from a window in her recordings. The mic screen works well for this job and has reduced this undesired sound well.

Pros:
1. Construction
Well constructed with almost all metal hardware, aside from the foam, and resin knobs.
The acoustic foam is sturdy and works well for its intended function as sound isolation.

2. Functionality
Helps to reduce reflected sound in rooms without acoustic treatment, as well as isolating the microphone from other sound sources and preventing cross talk.

3. Ease of use
Easy assembly and disassembly.


Cons

1. Weight
The mic screen is quite heavy and this makes it impractical to use with many mounting setups.
From a practical standpoint, it is only suited to being mounted vertically on top of a straight microphone stand with a wide heavy base, as it is too heavy to be mounted at the end of a standard boom arm or desk-mounted broadcasting arm.

2. Design.
The central L bracket stand is attached to the back of the mic screen using two metal thumb screws, and these have a tendency to come loose causing the bracket to sag. I have had to modify them (adding wax to the threads) to prevent this from happening.
This bracket offers very limited options for mic positioning, and it is difficult to adjust it without taking the screws out, effectively forcing you to disassemble it to do so. However, I think these issues could be improved quite easily by replacing the thumb screws with wing nuts instead.
Another improvement would also be allowing the mounting bracket to be adjusted by 90 degrees to change the weight distribution of the mic screen (so that it curves above and below the microphone rather than around the sides.)

3 Quality control
Whilst I appreciate it is a budget item, the quality control could be improved. The unit I received was covered in small damages from the manufacturer, including chipped and scratched paintwork, scuffed knobs, small areas of corrosion.

Conclusion
Overall, it works for it's intended purpose and will last a long time but there are some trade-off's with practicality and flexibility which will make it unsuitable for some setups.
Măiestrie
2
0
semnaleaza un abuz

semnaleaza un abuz