La conținutul paginii

Dynamic Microphone Booster

  • For dynamic or passive ribbon microphones
  • Gain: 25 dB
  • Power supply via phantom power
  • Frequency range: 10 - 20,000 Hz (± 1 dB)
  • Input and output: XLR
  • Dimensions: 24 x 25 x 78 mm
  • Weight: 100 g
  • disponibil din Mai 2020
  • numărul articolului 474739
  • unitate de vânzare 1 bucată(ăţi)
  • Channels 1
  • Number of microphone inputs 1
  • Instrument input No
  • Tubes No
  • Compressor/Limiter No
  • Equalizer No
  • De-Esser No
  • Phantom power No
  • Phase Reverse No
  • External effect loops No
  • Analogue Outputs XLR
  • Digitale Outputs 0
  • Headphone connection No
  • Level Meter No
  • Design Adaptor
155 lei
Toate prețurile includ TVA
în stoc
1

206 Evaluările clienților

4.6 / 5

Manipulare

Caracteristici

Sunet

Măiestrie

155 Recenzii

Ta
Excelenta la pret mic!
TheOne and Only 01.07.2023
Isi face treaba mai bine ca un Cloudlifter la 15% din bani. Ce mai vrei?
Manipulare
Caracteristici
Sunet
Măiestrie
1
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
PR
pretty good.
Peter R. 438 18.01.2022
This gives me around 1/4 turn more, on (most of) my pre gain knobs, audio technica mic.
I have listened hard and cannot hear any conceivable sound colouring to my voice/harmonica, but mic'd up guitar/mic booster does sound a little "compressed", a few tweaks on the eq and the guitar sounds great. Passive DI & electric guitar, with this inline are "OK" too, but passive DI's tend to compress a little.
I like to see people at the back talking while I perform, so I don't "blast" the punters, any small variations in my "preferred sound" are not too important. A little Sound colouring doesn't matter at all to most live performer's.
So this mic pre is a great weapon to have in the bag when using "house PA's".
Manipulare
Caracteristici
Sunet
Măiestrie
4
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
G
Protect your ribbon mic and give it a boost!
GuitarOil 03.04.2022
EDIT: These are very prone to breaking. I have gone through 2 of them. The release switch for the XLR cable is what tends to go. It is pretty scary when one of these is stuck inside of a microphone worth 10x the CT1. Maybe invest in something else. Also, just add an extra cable between the mic and the CT1 if you are going to use it.

I was living in constant fear of accidentally feeding my ribbon +48v Phantom Power by accident; now I don't. This is a great solution to protect your delicate mics while also reducing the need to add incredible amounts of preamp gain to hear them properly.
Manipulare
Caracteristici
Sunet
Măiestrie
8
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
ap
Small Device, Big Impact on Sound Quality
amavel pinto 20.03.2026
This is one of the products I use the most, especially in live music settings. It’s very powerful, and I have to say it solves most noise-related problems. One of its main advantages is that it reduces the need to push the mixer’s gain, resulting in a much cleaner and more controlled sound.

It’s an affordable piece of equipment, yet it delivers a level of quality that feels genuinely professional. At this point, performing live without it is almost unthinkable.

It operates using phantom power, so you do need to be careful—especially if your mixer doesn’t provide phantom power individually per channel. In those cases, activating phantom power across grouped channels can potentially damage instruments that don’t require it. This is something to pay close attention to.

That said, this unit is incredibly useful and solves many common problems, particularly for those starting out with smaller projects or live setups.
Manipulare
Caracteristici
Sunet
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz